KJ POWER GENERATOR manufactures its generator enclosures using automatic surface cleaning and acid washing on galvanized sheets.
The reduction varies by generator size, enclosure design, cooling airflow, exhaust silencer, load and the measurement method. There is no single dB reduction that applies to every acoustic canopy. The correct figure should come from model-specific acoustic test data measured at a stated distance and operating condition, then be compared with the site's required noise limit.
Yes, if airflow is restricted or hot discharge air recirculates into the enclosure. A soundproof canopy must still provide enough combustion and cooling air and allow radiator heat to leave the enclosure. Louvers, baffles and acoustic materials should be designed around the generator's airflow requirements. Site clearance around the intake and discharge openings is also important for preventing overheating.
An acoustic canopy is specifically engineered to reduce generator noise as well as protect the equipment. A weatherproof enclosure focuses primarily on protection from outdoor conditions and may provide little acoustic attenuation unless sound-control features are added. Many generator canopies combine both functions, but the project should verify acoustic data and environmental protection separately rather than assuming one guarantees the other.
Yes, when the enclosure is designed for the site's environmental conditions. Outdoor suitability depends on weather sealing, drainage, louvers, corrosion protection, temperature range and wind exposure. Rain resistance alone does not prove suitability for coastal salt, extreme heat, snow or severe dust. The selected canopy specification should match the actual installation environment.
It can be possible, but the retrofit must be engineered around the existing generator's dimensions, radiator airflow, exhaust, service points and heat rejection. A poorly designed enclosure can create overheating or maintenance problems. The retrofit should also define the required acoustic target and confirm that the base frame and lifting/installation arrangement can support the new canopy.
Coastal sites generally require an enclosure designed for elevated corrosion exposure, with suitable material selection, surface preparation, coating, drainage and hardware. Direct salt spray and humid air can also enter through ventilation openings, so louver design and maintenance access matter. The exact protection system should be selected from the site's corrosion severity and expected service life, not from paint colour or canopy thickness alone.
Yes. Generator enclosure prices vary with the dimensions required for the generator, construction materials and the specified level of sound insulation. Larger enclosures, additional acoustic barriers, specialised ventilation and super-silent designs may increase the cost. An accurate quotation depends on the generator specifications and project requirements.
By subscribing to our newsletter, you'll be the first to receive information about our new products, promotions, and industry developments. By subscribing, you acknowledge that you have read and accepted the Personal Data Protection Law (KVKK)
KJ Power is a well-established diesel generator manufacturer operating in the energy sector since 1996. The company, which produces a wide range of diesel generator sets from 10 kVA to 5000 kVA, has international ISO 9001:2015 and other important certificates. As a generator company, it provides special generators for projects by offering special engineering solutions. Serving many sectors in Turkey, KJ Power has proven its global success as a generator manufacturer by exporting 90% of its production to more than 120 countries.